31.08.2010 Samsung WAVE S8500 Unbrick/Repair boot beta support
This is beta test, and it is not available trough “Check for updates” button.


What You need to repair it ?
- RIFF Box
- Micro USB Cable
- Full charged battery (4.2v)
- CMM + ELF
- Samsung_S8500_PDA.dll
- Pinout
- Multiloader
- USB Drivers
- Firmware files
Procedure:
- Solder RIFF JTAG cable (use very thin wires for PCB, because of battery)
- Insert battery
- Connect Micro USB cable to phone and PC port
- Start the JTAG Manager and select Samsung S8500 PDA from the list
- Switch to “DCC Read/Write” TAB
- Set everything as on photo bellow:
This image has been resized. Click this bar to view the full image. The original image is sized 830x460.
- Press “Read memory” and wait to be finished
- Now switch to “JTAG Read/Write” TAB and press “Connect&Get ID” then “Halt the Target” buttons
- Click “Execute Script” and select CMM file
- Press “Run Script” button
This image has been resized. Click this bar to view the full image. The original image is sized 761x711.
- Ram loader will be uploaded and after its uploaded, phone will automaticaly enter download mode, and detected by PC
- IMPORTANT ! ! ! Now You must disconnect JTAG Cable from RIFF Box
- Start Multiloader 5.62, set “Boot change” and select Boot files folder
- Press download – and wait for process to be finished
- Now phone contains valid bootloader, and can be flashed, so You can desolder JTAG wires from PCB
To enter download mode hold LOCK+Volume Down + Power on Keys.
Problems which You may have:

- Target not detected – check all wires and tp, check battery, 4.2v is a MUST !
- Wrong DCC answer – low battery, or TCK too high, You can use 100KHz TCK too !
- “It not work” – no idea about this lol

RIFF JTAG - How to Unlock HTC Phones

Hi,
Here's very short and simple manual how You can unlock Your HTC phone with RIFF Box.

- Select desired model and read the "Resurrection Help"
- Solder JTAG wires, or connect using JIG
- Press "Resurrection" button
- Check "Reflash Total HTC partition" and enter desired IMEI in IMEI field
- Click "Continue"

This image has been resized. Click this bar to view the full image. The original image is sized 829x458.

If You want to read full flash backup before playing with phone, do this:

- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- Click "Read Memory"
- When reading is finished, click "Save"

This image has been resized. Click this bar to view the full image. The original image is sized 831x459.


If You want to restore backup, do this :

- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- In "main" field open desired backup file
- Check "Image Files use Used"
- Check "Flash files - are full Images"
- Click "Write Flash"

This image has been resized. Click this bar to view the full image. The original image is sized 831x460.

Thats mostly it

11.09.2010 Samsung i8510 Unbrick/Repair boot supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8510_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I8510 Innov8 Unbrick/Repair PDA part boot.

RIFF JTAG - Samsung M8910, i8320 unbrick/repair supported

11.09.2010 Samsung i8320 modem part Unbrick/repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8320_mdm.dll” contains required repair files for i8320 modem part.




11.09.2010 Samsung m8910 Unbrick/repair boot supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_m8910.dll” contains required files for unbrick/repair bricked Samsung m8910.

RIFF JTAG - Samsung S3370, Samsung C5510 updates

15.09.2010 Samsung S3370 Unbrick/Repair bricked phones supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S3370.dll” contains pinout, repair instructions and required files for single click Samsung S3370 Unbrick/Repair boot.



15.09.2010 Samsung C5510 Unbrick/Repair DLL Update
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_C5510.dll” contains required files for unbrick/repair bricked Samsung C5510